Research Facilities available in the Department Laboratories | ||
---|---|---|
Sl. No. |
Name of the facilities |
Utilization of facilities |
1. |
MCAD Laboratory |
|
2. |
Mechanical Research Laboratory
CREO 1.0 |
|
3. |
Machine Shop
|
|
4. |
Material science and Metallurgy Laboratory
|
|
5. |
IC Engines Laboratory
|
|
6. |
Energy Engineering Laboratory
|
|
7. |
Heat Transfer Laboratory
|
|
8. |
Work Shop
|
|
9. |
Measurements & Metrology
|
|
10. |
Composite Materials Laboratory | UTM Pin on Disc |
11. |
Indo American Artificial Heart Project (IAAHP) -
|
|
Objectives of Indo American Artificial Heart Project (IAAHP):
The condition of patients with heart failure often declines even with optimal medical treatment. Heart transplantation has traditionally been the preferred treatment of such patients. The lack of donor organs motivated the development of the Total Artificial Heart in the early 60s and development continues to this day. Early artificial hearts such as the pulsatile devices imitates the natural hearts action but yielded poor results due to their large size, invasiveness, complexity, and need for extracorporeal support connections. While debate has continued over the necessity of pulsatile action, rotary pumps with their smaller size and simpler designs, have been steadily gaining popularity as blood pumps for temporary support of an ailing heart. Newer axial blood pumps incorporate several design features such as magnetically levitated rotors, CFD optimized impeller and diffuser blades, bio-compatible materials, and transcutaneous power transmission. These small and robust pumps such as the Left Ventricle Assist Device play an increasing role for those awaiting a heart transplants. The duration of this & temporary support has been increasing to the point where LVAD axial pumps are now being considered as a destination therapy in some cases. Here an attempt is being made to design, manufacture and market a TAH with low cost and higher efficiency for the developing countries like INDIA.
Role of KITSW in IAAHP
Department of Mechanical Engineering is working on Computational Fluid Dynamics Analysis using ANSYS work bench for modeling and analysis of Heart Pump and development of prototype model using 3D Printer.
Department of Electronics and Instrumentation Engineering have been performing Mockup Loop Testing to study the characteristics of blood flow experimentally.
Department of Electrical and Electronics Engineering is working on Brushless Direct Current (BLDC) motor control system.
Faculty as Research Supervisor |
||||||
---|---|---|---|---|---|---|
S.No. |
Name of the Supervisor |
Name of the Research Scholar |
Research Area/Topic |
Year of Admission |
Status |
|
|
Dr. K. Eswaraiah |
B. Ravindar |
Studies on the Joining of 5083 Aluminium Alloy by Pulse Tig Welding & Friction Stir Welding Process |
January 2012 |
Awarded in 06.01.2020 |
|
|
Dr. K. Eswaraiah |
J.Laxman |
Mathematical Modeling and analysis of EDM Process Parameters |
January 2012 |
Awarded in 14.06.2021 |
|
|
Dr. K. Eswaraiah |
B. Anil Kumar |
Experimental Investigation and Optimization of Machining Parameters of Electric Discharge Machine for Metal Matrix Composites |
August 2015 |
Awarded in 30.12.2021 |
|
|
Dr. K. Eswaraiah |
S. Chandramouli |
Multi-objective Optimization of EDM Process Parameters |
January 2012 |
In Progress |
|
|
Dr. K. Sridhar |
G. Buchi Babu |
Exergy Analysis of Thermal Power Plant |
January 2012 |
In Progress |
|
|
Dr. K. Sridhar |
G. Vinod Kumar |
Thermodynamic Analysis of Solar Collectors using different Working Fluids |
January 2012 |
In Progress |
|
|
Dr. K. Eswaraiah |
K. Rajender |
Mechanical Characterization and Optimization of Metal Matrix Composites |
August 2015 |
In Progress |
|
|
Dr. K. Sridhar |
G. Lingaiah |
Performance Analysis of Parabolic Trough Receiver with Different Configuration using Various Working Fluids. |
August 2015 |
In Progress |
|
|
Dr. K. Raja Narender Reddy |
V. Srikanth |
Development and Characterization of Bio Composites-A Comparative Study. |
August 2015 |
In Progress |
|
10 |
Dr. K. Eswaraiah |
V. Sampath |
Experimental Investigation and Multi-Objective Optimization of Machining Parameters for Electric Discharge Machine. |
August 2015 |
In Progress |
|
11 |
Dr. K. Sridhar |
Dasari Nalini |
Thermodynamics Analysis of a flat-plate Solar Air Heater having different Obstacles on Absorber Plates |
August 2015 |
In Progress |
|
12 |
Dr. K. Raja Narender Reddy Professor, KITS, Warangal |
T. Ramu |
Development and characterization of randomly oriented short natural fibre composites |
August 2015 |
In Progress |
|
13 |
Dr. K. Eswaraiah |
G. Meher Shilpa |
Designing and Optimization of 3D Printed Spine Fuse to Treat the Problem of Degenerative Disc Disease |
February 2018 |
In Progress |
|
14 |
Dr. K. Sridhar |
K. Rajanikanth |
Investigation of flow behaviour of multi phase fluid particles in fluidized bed gasi fires using CFD Analysis |
February 2018 |
In Progress |
|
15 |
Dr. K. Sridhar |
P. Rukmini |
Comparative study of solar air heater performance with different shapes on absorber plate surface |
February 2018 |
In Progress |
|
16 |
Dr. K. Raja Narender Reddy Professor, KITS, Warangal |
Md. Ilyas Hamid |
Studies on the Development of Cellulose Based Bio Composites |
February 2018 |
In Progress |
|
17 |
Dr. K. Raja Narender Reddy Professor, KITS, Warangal |
B. Sahithya |
Preparation and Investigation on the Performance of Cellulose/KGK Composites |
February 2018 |
In Progress |
|
18 |
Dr. P. Srikanth, |
P. Sateesh Kumar |
Experimental Investigation And Optimization of Machining Parameters of Harder Alloys In Micro-EDM Process |
February 2018 |
In Progress |
|
19 |
Dr. P. Srikanth, |
M. Madhavi |
Optimization of Micro-EDM Process Parameters on Hardened Steels |
February 2018 |
In Progress |
|
20 |
Dr. G. Ganesh Kumar Associate Professor, KITS, Warangal |
B. Naveen |
Conjugate Mixed Convection with Surface Radiation Through a Copper Plate used in Thermo Electrical Generator |
February 2018 |
In Progress |
|
21 |
Dr. G. Ganesh Kumar Associate Professor, KITS, Warangal |
D. Srinu |
Experimental and Numerical Studies on Thermo-Electric Generator used in Internal Combustion Engines |
February 2018 |
In Progress |
|
22 |
Dr. P. Prabhakara Rao, Associate Professor, KITS, Warangal |
K. Sudheer Kumar |
Investigation of External Chills Performance on Mechanical and Thermal Properties of Aluminum Silicon Alloy Castings |
February 2018 |
In Progress |
|
23 |
Dr. P. Prabhakara Rao, Associate Professor, KITS, Warangal |
M. Nataraju |
Some studies on dynamic characterization of metal matrix composites and its optimization |
February 2018 |
In Progress |
Faculty Pursuing Ph.D. Degree |
||||
---|---|---|---|---|
S.No. |
Name of the faculty |
Title of the Research |
University/ Institution |
Status |
|
Sri S. Chandramouli |
Multi objective Optimization of Electric Discharge Machining Process parameters |
Kakatiya University, Warangal |
In Progress |
|
Sri Ch. Karunakar |
Development and Characterization of Hybrid Cellulose Composites |
Kakatiya University, Warangal |
In progress |
|
Sri G. Vinod Kumar |
Thermodynamic analysis of solar collectors using different working fluids |
Kakatiya University, Warangal |
In Progress |
|
Sri S. Ramesh |
Experimental Analysis of Packed Bed Thermal Energy Storage System using Nanofluid. |
Kakatiya University, Warangal |
In progress |
|
Sri A. Hari Kumar |
Development and Analysis of Aluminium Composite Foams: Analytical, Numerical and Experimental Characterization |
Osmania University, Hyderabad |
In progress |
|
Sri S. Anil Kumar |
Exergetic Optimization of Solar Air Heaters |
Osmania University, Hyderabad |
In progress |
7. |
Sri K. Kishor Kumar |
Development and characterization of hybrid short fiber reinforced natural |
Osmania University, Hyderabad |
In progress |
8. |
Smt. P. Anitha |
Experimental Investigation of Tribological Mechanical Properties of Nano Composite Materials |
JNTU, Hyderabad |
In progress |
9. |
Sri S. Sripathy |
Preparation and Characterization of Mechanical Properties of Glass Fiber Reinforced Composite with Polymer as Matrix Materials |
Osmania University, Hyderabad |
In progress |
10. |
Sri. V. Srikanth |
Development and Characterization of Bio Composites-A Comparative Study |
Kakatiya University, Warangal |
In progress |
11. |
Sri V. Prasanna |
Optimization of wire EDM of Nimonic alloy by using RSM |
Osmania University, Hyderabad |
In progress |
12. |
Sri V. Rakesh |
Displacement analysis of a link in spatial mechanism by using position vectors |
JNTU, Hyderabad |
In progress |
13. |
Sri P. Anil Kumar Assistant Professor |
Computational and Experimental analysis of emission behaviour of biodiesel blends in CI engine |
Sathyababa University, Chennai |
In progress |
14. |
Sri P. Sreedhar |
Influence of Process Parameters in Friction Surfacing of Aluminum Alloy Over Mild Steel |
Kakatiya University, Warangal |
In progress |
Research Programs Conducted by Dept/Faculty |
||||||
---|---|---|---|---|---|---|
S.No. |
Title of the Program |
Duration |
No. of Participants attended |
Host Department |
||
From |
to |
|||||
|
Research Methodology (RM-19) |
7.01.2019 |
11-01.2019 |
60 |
Jointly organized with UCE&T, Kakatiya University & KITS, Warangal |
|
|
Research Methodology & Computational Techniques (RMCT) -16 |
26.06.2016 |
01.07.2016 |
46 |
Mechanical Engineering Dept, KITS, Warangal |
Faculty in Editorial Boards |
||||
---|---|---|---|---|
S.No. |
Name of the faculty |
No. of Editorial Boards |
Title of the Journal |
Designation in the editorial Board |
|
Dr. K. Sridhar |
1 |
International Journal of Nano Science and Nano Technology |
Chief Editor |
2 |
International Journal of Nano Technology, Electrical Engg. and Electronic Systems |
Chief Editor |
||
3 |
International Journal of Logic Based Intelligent Systems |
Editor |
||
|
Dr. P. Prabhakara Rao |
1 |
Journal of SAS Publishers a Unit of Scholars Academic & Scientific Society |
Chief Editor |
3. |
Dr. A.Devraju |
Mechanical |
Journal Mineral and Material Science |
Associate Editor |
Faculty as Reviewers of Journals |
|||
---|---|---|---|
S.No. |
Name of the faculty |
No. of Reviewers of Journal |
Title of the Journal |
|
Dr. K. Sridhar |
1 |
International Journal of Engineering Research (IJER) ISSN No: 2319- 6890 |
2 |
International Journal Of Multidisciplinary Research And Modern Education (IJMRME) ISSN No: 2454-6119 |
||
3 |
International Journal of Advances In Engineering Research (IJAER), E- ISSN No: 2231-5152, P-ISSN No: 2454-1796 |
||
4 |
International Journal of Research In Science & Technology (IJARST), E- ISSN No: 2249-0604, P-ISSN No: 2454-180x |
||
5 |
International Journal of Innovations In Scientific Engineering (IJISE), E- ISSN No: 2454-6402 |
||
2. |
Dr. A. Devaraju |
1 |
Journal of Manufacturing Process- Elsevier |
2 |
Journal Materials Research and Technology- Elsevier |
||
3 |
Journal of Materials today Proceedings |
||
|
Dr. Abhay B Lingayat |
1 |
Environmental Engineering and Management Journal, ISSN No: 1582-9596. |
Faculty Publications (up to 2020-21) |
||||||
---|---|---|---|---|---|---|
S.No. |
Name of the Faculty Member |
No. of Papers Published in Journals |
No. of Papers Published in Conferences |
|||
International |
National |
International |
National |
|||
|
Dr. K. Sridhar |
22 |
- |
33 |
- |
|
|
Dr. K. Eswaraiah |
26 |
- |
33 |
- |
|
|
Dr. K. R.Narender Reddy |
11 |
- |
14 |
12 |
|
|
Dr. P. Srikanth |
05 |
- |
09 |
- |
|
|
Dr. U. ShrinivasBalraj |
12 |
- |
14 |
1 |
|
|
Dr. G. Ganesh Kumar |
16 |
- |
23 |
03 |
|
|
Dr. P.Prabhakar Rao |
13 |
- |
20 |
02 |
|
|
Dr. A. Devaraju |
41 |
- |
20 |
- |
|
9 |
Sri P.S.S. Murthy |
04 |
- |
06 |
- |
|
10 |
Dr. J. Laxman |
09 |
- |
06 |
01 |
|
11 |
Sri S.Chandramouli |
10 |
- |
11 |
01 |
|
12 |
Dr. G. Srinivasa Rao |
15 |
- |
07 |
- |
|
13 |
Sri Ch. Karunakar |
05 |
- |
10 |
01 |
|
14 |
Sri G.Vinod Kumar |
06 |
- |
11 |
01 |
|
15 |
Sri S.Ramesh |
03 |
- |
01 |
01 |
|
16 |
Sri A. Hari Kumar |
03 |
- |
03 |
01 |
|
17 |
Sri S.Anil Kumar |
08 |
- |
07 |
01 |
|
18 |
Sri K.Kishor Kumar |
09 |
- |
09 |
01 |
|
19 |
- |
- |
- |
- |
||
20 |
Dr. MD. Sameer |
13 |
- |
07 |
||
21 |
Dr. G. Sai Kumar |
05 |
- |
05 |
- |
|
22 |
Sri G. Srinu |
07 |
- |
01 |
- |
|
23 |
04 |
- |
02 |
03 |
||
24 |
Sri S. Sripathy |
04 |
- |
02 |
01 |
|
25 |
01 |
- |
02 |
- |
||
26 |
Sri V. Srikanth |
- |
- |
02 |
02 |
|
27 |
Sri V. Prasanna |
- |
- |
- |
- |
|
28 |
Sri D. Sammaiah |
01 |
- |
- |
- |
|
29 |
Ms. P. Divya |
- |
- |
01 |
- |
|
30 |
Ms. V. Laxmi Priyanka |
02 |
- |
- |
- |
|
31 |
Sri V. Rakesh |
01 |
- |
- |
01 |
|
32 |
Sri P. Anil Kumar |
01 |
- |
01 |
- |
|
33 |
Sri P. Sreedhar |
01 |
- |
- |
- |
|
34 |
Sri V. Rajesh |
01 |
- |
- |
- |
|
35 |
Ms. G. Sumithra |
- |
- |
01 |
- |
|
36 |
Sri V. Pradeep |
02 |
- |
- |
- |
|
37 |
Dr. E. Ramesh |
02 |
- |
03 |
- |
|
38 |
Dr. Shakuntala Ojha |
33 |
- |
25 |
- |
|
39 |
Dr. T. Manoj Kumar Dundi |
06 |
- |
04 |
- |
|
40 |
Dr. Ch. Naresh |
12 |
- |
01 |
- |
|
41 |
Dr. B. Srinivasa Reddy |
05 |
- |
02 |
01 |
|
42 |
Dr. M. Om Prakash |
15 |
- |
05 |
- |
|
Total |
332 |
0 |
306 |
35 |
Faculty as Session Chairs /Resource Persons |
||||||
---|---|---|---|---|---|---|
S.No. |
Name of the Faculty |
Session Chair/ Resource Person |
Name of the Conference/SDP/GL |
Organizing Institutes |
Academic year |
|
|
Dr. K. Eswaraiah |
Resource Person |
Guest Lecture on Advances in Production Engineering |
Aurora Research Institute, Warangal |
2015-16 |
|
Resource Person |
Guest Lecture on Optimization Techniques |
KITS, Warangal |
2016-17 |
|||
Resource Person |
Guest Lecture on Research Methodology |
KITS, Warangal |
2017-18 |
|||
Resource Person |
Guest Lecture on Auto CAD |
KITS, Warangal |
2017-18 |
|||
Resource Person |
Guest Lecture on Research Methodology |
KITS, Warangal |
2018-19 |
|||
|
Dr. K. Sridhar |
Resource Person |
Guest Lecture on effective skills in Paper Writing |
KITS, Warangal |
2015-16 |
|
Resource Person |
Guest Lecture on Research Prospects on Solar Energy |
KITS, Huzurabad |
2017-18 |
|||
Resource Person |
Guest Lecture on effective skills in Paper Writing |
KITS, Warangal |
2015-16 |
|||
Resource Person |
Guest Lecture on Recent trends in thermal Engineering |
GIET, Orissa |
2014-15 |
|||
Resource Person |
Guest Lecture on Exergy Analysis |
KITS, Huzurabad |
2013-14 |
|||
Resource Person |
Guest Lecture on Engineering Graphics |
KITS, Warangal |
2017-18 |
|||
3. |
Prof. R. Ravinder Rao |
Resource Person |
Guest Lecture on Engineering Drawing |
WITS, Warangal |
2017-18 |
|
4. |
Dr. K. Raja Narender Reddy Professor, KITS, Warangal |
Resource Person |
Guest Lecture on Composite Materials |
WITS, Warangal |
2015-16 |
|
5. |
Dr. P. Srikanth, |
Resource Person |
Entrepreneurship Development |
IETE Center, Warangal |
2014-15 |
|
Resource Person |
Entrepreneurship Development |
KITS, Huzurabad |
2014-15 |
|||
Resource Person |
Entrepreneurship Development |
IETE Center, Warangal |
2013-14 |
|||
Resource Person |
Guest Lecture on Tool and Techniques in SQC |
KITS, Warangal |
2015-16 |
|||
6. |
Dr. G. Ganesh Kumar |
Resource Person |
Guest Lecture on CFD Analysis |
KITS, Warangal |
2015-16 |
|
7. |
Dr. U. Shrinivas Balraj |
Resource Person |
Guest Lecture on Rubrics |
KITS, Warangal |
2016-17 |
|
Resource Person |
Guest Lecture on Teaching-Learning Process and Educational Technology Tools |
KITS, Warangal |
2016-17 |
|||
Resource Person |
Guest Lecture on Pathologies of Teaching-Learning Process |
KITS Singapur, Huzurabad |
2015-16 |
|||
Resource Person |
Guest Lecture on Enhancing Properties of Composite Materials |
KITS, Warangal |
2016-17 |
|||
Resource Person |
Guest Lecture on Multi-objective Optimization Techniques |
KITS, Warangal |
2015-16 |
|||
Resource Person |
Guest Lecture on Metal matrix composites |
KITS, Warangal |
2014-15 |
|||
8. |
Sri P.S.S.Murthy |
Resource Person |
Guest Lecture on Overview on MATLAB |
KITS, Warangal |
2015-16 |
|
9. |
Sri Laxman |
Resource Person |
Guest Lecture on Latex Software |
KITS, Warangal |
2015-16 |
|
10. |
Sri S. Chandramouli |
Resource Person |
Guest Lecture on MINITAB Software |
KITS, Warangal |
2015-16 |
|
11. |
Dr. P. Prabhakara Rao |
Session Chair |
International Conference ICARIMMIEM-2014 |
CJIT, Jangaon |
2014-15 |
|
Resource Person |
Guest Lecture on System Simulation |
KITS, Warangal |
2015-16 |
|||
12. |
Dr. G. Srinivasa Rao |
Resource Person |
Guest Lecture on on hands on experience MATLAB for ODE |
KITS, Warangal |
2015-16 |
|
13. |
Dr. Abhay B Lingayat |
Resource Person |
Guest Lecture on Making reference list as per the journal format using software tools |
NIT, Warangal |
2019-20 |
Faculty who acquired PhD during the last five years |
|||
---|---|---|---|
S.No. |
Academic Year in Ph.D Awarded |
Name of the Faculty Member |
Name of the University |
1. |
2021-22 |
Dr. P.Satya Srinivasa Murthy |
JNTU, Kakinada, A.P. |
2. |
2020-21 |
Dr. J.Laxman |
Kakatiya University, Warangal |
3. |
2020-21 |
Dr. B.Srinivasa Reddy |
NIT, Warangal |
4. |
2020-21 |
Dr. Ch.Naresh |
NIT, Warangal |
5. |
2020-21 |
Dr. T.Manoj Kumar |
NIT, Warangal |
6. |
2019-20 |
Dr. G.Srinu |
NIT, Warangal |
|
2019-20 |
Dr. Md.Sameer |
NIT, Manipur |
8. |
2019-20 |
Dr. Abhay B Lingayath |
NIT, Warangal, T.S. |