KITSW Main page
Department of Mechanical Engineering
KITS Warangal
Faculty group mail-id : me@kitsw.ac.in
 
Faculty Profile
Address/Contact
Office : Room No. 211, Block - III, Dept. of ME.
Phone: 0870-2564888(ext: 299)
Mobile: 9347706262
Domain E-mail : chkr.me@kitsw.ac.in

Alternate E-mail : challakarunakar@gmail.com
 
Education
B.Tech., Production Engineering, Kakatiya University, Warangal. (2006).
M.Tech., Mechanical Engg (Production Engg), Osmania University (2008).
Ph.D.(Pursuing), Development and Characterization of Hybrid Cellulose  Compositses (Composite Materials), Kakatiya University, Warangal.
(Registered in 2018).
CHALLA KARUNAKAR
ASSISTANT PROFESSOR
Department of Mechanical Engg.
Academic Research IDs
Vidwan ID: 176339
SCOPUS ID:     --
Researcher ID: AAC-7687-2021
Google Scholar ID:     --
ORCID ID:     --
 
ACADEMIC AFFILIATION
Details

From

To
Name of the Organization
Assistant Professor

June 2009

Till to date
Kakatiya Institute of Technology & Science, Warangal.
Assistant Professor(Adhoc)

12-06-2008

31-05-2009
Mannan Institute of Science & Technology, Chevella, Ranga Reddy.
RESEARCH INTERESTS
  • Cellulosed Based Natural Fiber Reinforced Composites
  • Green Composites.
PUBLICATIONS
Publications in Refereed Journals

S. No
Details                                                                                                                                               

1
Mohd. Abdul Mubeen, Sri Ch. Karunakar, S.Sripathy “Preparation and Testing of Glass Powder Reinforced Polyester Resin Lamina” Materials today proceedings Science Direct (Elsevier), Volume 23, Part 3, 2020, Pages 608-612.
https://doi.org/10.1016/j.matpr.2019.05.419
2
Challagonda Sandeep Reddy, Kandagatla Uday Kiran and Ch. Karunakar, “Design of Air Bag System by Hydraulic Circuit and Direct Acting Solenoid Flow Regulator”, International Journal of Science Technology & Engineering (IJSTE) volume 4, issue 09, March 2018, ISSN:2349-784X, PP 120-123.
3
Challagonda Sandeep Reddy, Ch. Karunakar, Yelisetti Narendra Jumar and Kandagatla Uday Kiran, “Design of Hydraulic Bumper for Mitigation of Low Speed Collisions”, International Journal of Science Technology & Engineering (IJSTE) volume 4, issue 11, May 2018, ISSN:2349-784X, PP 62-65.
4
Kishor K Kumar, Ch. Karunakar and B. ChandraMouli, “Development and Characterization of Hybrid Fibres Reinforced Composites Based on Glass and Kenaf Fibers”, Elsevier: Materials Today Proceedings 5(2018) 14539-14544, pp 14539-14544.
5
B.Gowtham,Ch.Karunakar, A.Prasanth,T.Vamshi “Development and evaluation of some of the mechanical Properties of kenaf/polyester cellulose composites” IJMET, ISSN 0976 – 6340 (Print) , ISSN 0976 – 6359 (Online), Volume 5, Issue 9, September (2014), pp. 266-272.
Publications in Refereed Conference Proceedings

S. No
Details                                                                                                                                               

1
Ch.Karunakar, K.Kishor Kumar, Zeenath Khathoon “Investigation of Flexural and Tensile Properties of Kenaf and Glass Fiber Reinforced Composites “4th National Conference on Recent Trends & Innovations in Mechanical Engineering 24th & 25th July, 2020, Department of Mechanical Engineering, NNRG, ISBN: 978-93-5268-241-6

2
Mohd. Abdul Mubeen, Sri Ch. Karunakar, S.Sripathy “Preparation and Testing of Glass Powder Reinforced Polyester Resin Lamina”, International conf: Recent advances in Materials, Manufacturing and energy systems (ICRAMMES-2019), materials today proceedings Science Direct (Elsevier), 3rd -4th Jan. 2019.
3

Ch.Karunakar, K.Raja Narender Reddy,  “INVESTIGATION OF FLEXURAL AND TENSILE PROPERTIES OF KENAF POWDER COMPOSITES”,  Proceedings of the 1 st International and 18 th ISME Conference, ISME 18, February 23 rd – 25 th , 2017, NIT Warangal, Warangal, ISME-MM- 054
4

Kishor K Kumar, Ch. Karunakar and B. ChandraMouli, “Development and Characterization of Hybrid Fibres Reinforced Composites Based on Glass and Kenaf Fibers”ICAFM-17,3rd-5th -2017, ISBN 978-93-80757-995

5
Ch.Karunakar, Pranavi.D, K.Raja Narender Reddy and S.Sripathy , “Development and Investigation of Flexural and Tensile Properties of GFRP/Rice Husk Polyester Composite”, National Conference on Advances in Research and Innovations in Mechanical Engineering, Material Science, Industrial Engineering and Management, NIT, Manipur ,Dec 2016.  ISBN 978-93-86176-46-2, PP: 110-114

6
A.Kiran Kumar, K. Kishor Kumar, Ch. Karunakar “Ultrasonic Measurements of the Elastic Moduli of natural Fiber Reinforced Cellulose Composites”, 25th National Seminar & International Exhibition on "NON DESTRUCTIVE EVALUATION" – 2015 held at Hyderabad from: 26 to 28, November 2015.
7
B.Gowtham,Ch.Karunakar, A.Prasanth,T.Vamshi “Development And Evaluation of Some of The Mechanical Properties of Kenaf/Polyester Cellulose Composites” 2 nd International Conference on Current Trends in Engineering and Management ICCTEM-2014, 17 – 19, July 2014.
8
K.Kishor Kumar, Ch.Karunakar and Dr. K.Raja Narender Reddy “Flexural  Properties Of  Green Composites Reinforced With Short Kenaf And Thespesia Lampus Fibers”  in Proc. of  International Conference on Advanced Materials, Manufacturing, Management & Thermal Sciences (AMMMT-2013) at SIT-Tumkur, during May 03-04, 2013.  ISBN-13 978-81-926304-0-3.  
9
  
Ch. Karunakar, Dr.K. Raja Narender Reddy, K. Kishor Kumar ‘‘Preparation and characterization of cellulose based natural fibre reinforced composites’’ (NCAME) 5-6th April 2013, vignan university, Guntur.Pp72-75.
10
K. Kishor Kumar,  A. Kiran Kumar and Ch.Karunakar “Applications of MEMS in Bio-Medical field” in Proc. of 1st National conference on Advances in Mechanical Engineering at KITS, Huzurabad, India on 16th May 2012. Pp
11
K. Raja Narender Reddy, Ch. Karunakar K. Kishor Kumar, and Dr D.K. Nageswara Rao “Dynamic Mechanical Behavior of Woven Kenaf / polyester Composites” in Proc. Of Fourth National Conference on Trends in Mechanical Engineering (TIME' 10) at KITS, Warangal. India on 30th December, 2010. Pp 44-49.
PROFESSIONAL AFFILIATION

S.No
Details

1
Member – Indian Society for Technical Education (ISTE- LM 88246)
2
SAE- Society of Automotive Engineers (7190410355)
FACULTY DEVELOPMENT PROGRAMMES ATTENDED

S. No.
Programme

Duration
Organized by
1
Robotics

2020-12-14 to 2020-12-18

(ATAL) at Ramrao Adik Institute of Technology.
2
"Electric Vehicles"

2020-12-7 to 2020-12-11
Bhilai Institute of Technology.
3
Advanced Materials And Manufacturing

29/06/2020 to 03/07/2020
KITS-Warangal
4
Recent Developments in Mechanical
Engineering (RDME-2020)

7th to 11th July, 2020
KITS-Warangal
5
Advancements In Mechanical, Production & Civil Engineering And ICT In Teaching - Learning Process

 

13th to 26th may 2020
IQAC & HRD Centre of Sri Sai Ram Engineering College, Chennai, Tamil Nadu.
6
Advanced Materials and Additive Manufacturing

One week
NALLA MALLA REDDY ENGINEERING COLLEGE, MEDCHAL
7
Heat Transfer And Computational Fluid Dynamics Towards Industrial Applications

 

12th  to 18th June 2020
Sai Ram Engineering College, Chennai, Tamil Nadu.
8
Disruptive Technologies in Digital Manufacturing (DTM-2019)

25th to 29th Nov-2019
KITS-Warangal
9
Research Methodology-RM’19 from

7th  to 11th January 2019

Kakatiya University and KITS-W
10
Hands on Programme on ANSYS software (HPAS-18)

12th to 16th November, 2018
KITS-WARANGAL
11
FDP on Engineering Drawing

19th to 23rd July 2017.

KITS-WARANGAL
12
Quality Assurance in Higher Educational institutions and industries” held at from

19th to 23rd July 2017.

KITS-WARANGAL
13
RESEARCH METHODOLOGY & COMPUTATIONAL TECHNIQUES (RMCT-16)

27th June to 1st July 2016.

KITS-WARANGAL
14
  
“FINITE ELEMENT AND ITS APPLICATIONS” held From

22-12-2014 to 03-01-2015

Jayamukhi Institute of Technology & Science-Warangal
15
“Advances in Composites -A Research Perspective”

26th to 30th June 2012

Gayathri Vidya Parishad Engineering College, Vizag
COURSES TAUGHT

Undergraduate Level

Courses Taught

Currently Teaching
Course

Semester, Year, Branch
Course

Semester, Year, Branch
Kinematics of Machinery

I  Sem, III/IV, ME
Engineering Drawing

I Sem, I Yr, ECI

Dynamics of Machinery

II  Sem, III/IV, ME

Finite Element Method

VI Sem, III Yr, ME
Design of Machine Elements -I

I  Sem, III/IV, Mech. &

IV Sem Autonomous Batch

 

 
Finite Element Method

I  Sem, IV/IV, ME

   
Engineering Graphics

I Yr, I Sem

    
Engineering Drawing

I Sem, (Autonomous Batch)

    
Basic Mechanical Engineering

II Sem, (Autonomous Batch)

    
Design of Transmission systems

V Sem, III Yr, ME

   

Postgraduate Level
CAD & G

I Sem, M.Tech.(DE)

 

 
Advanced Machine Design Components

II Sem, M.Tech.(DE)

    
AWARDS
S.No. Details

1
Guru Dhronacharya Award in “National Kart Championship- 2019” organized by Credible Future India Pvt. Ltd.,

 

 
Best viewed in browser Internet Explorer 9 or above with screen_Resolution 1280X1024