Department of Mechanical Engineering
KITS Warangal
Faculty group mail-id : me@kitsw.ac.in
Faculty Profile
Address/Contact
Office : Room No.213, Block - III, Dept. of ME.
Phone: 0870-2564888(ext:301)
Mobile: 09849502775
Education
B.Tech., Production Engg, V.R. Siddhartha Engineering College, Vijayawada/ Nagarjuna University (1999).
M. E., Manufacturing Systems Engineering, Birla Institute of Technology and Science, Pilani, (2001).
Ph.D., Mechanical Engg., National Institute of Technology and Science, Warangal (2013).
Dr. GANESH KUMAR GAMPA
ASSOCIATE PROFESSOR
Department of Mechanical Engg.
Academic Research IDs
Vidwan ID: 176233
SCOPUS ID: --
Researcher ID: HLX-4491-2023
Google Scholar ID: --
ORCID ID: --
ACADEMIC AFFILIATION
Details |
FromTo |
Name of the Organization |
||
|---|---|---|---|---|
Associate Professor |
April, 2016 |
Till date |
Kakatiya Institute of Technology & Science, Warangal. |
|
Assistant Professor |
June, 2008 |
April, 2016 |
|
Kakatiya Institute of Technology & Science, Warangal. |
Assistant Professor |
September, 2004 |
June, 2008 |
|
S. R. Engineering College, Warangal. |
| Adhoc Lecturer |
May, 2002 |
June, 2004 |
National Institute of Technology, Warangal. |
|
Teaching Assistant |
February, 2002 |
July, 2002 |
|
J. N. T. University College of Engineering, Hyderabad. |
RESEARCH INTERESTS
- Computational Fluid Dynamics,
- Heat Transfer (Mixed Convection, Perforated Fins, Thermo-electric Generator).
PUBLICATIONS
| Publications in Refereed Journals | |
|---|---|
S. No |
Details |
1 |
Ganesh Kumar, G., Sridhar, K., Ashoka Reddy, K., Venu Madhav K., Eswaraiah. K., (2021), “Experimental and Numerical Studies of a Centrifugal Heart Pump Used for Total Artificial Heart (TAH), ASAIO Journal June 21, Volume 67 (2), ISSN 1058-2916, pp 88, Wolters Kluwer Publishers. |
2 |
Ganesh Kumar, Sridhar, K., G., Ashoka Reddy, K., Venu Madhav K., Eswaraiah. K., (2021), “Comparative Studies on six and four bladed Centrifugal Heart Pump Used for Left Ventricular Assisted Device (LVAD)”, ASAIO Journal June 21, Volume 67(2), ISSN 1058-2916, pp 88, Wolters Kluwer Publishers |
3
|
Ganesh Kumar, G.,Jagadish Kumar, B., (2020), “Numerical analysis on angle of attack on bow shock formation in aerodynamic flows”, Journal of Information and Computational Science, Vol. 13 (12) 2020, pp. 100-105, ISSN: 1548-7741 |
4
|
Ganesh Kumar, G., Jagadish Kumar, B., (2020), “Investigations on plug-in hybrid electric vehicle”,Journal of Information and Computational Science, Vol. 13 (12) 2020, pp. 90-99, ISSN: 1548-7741 |
5 |
Ganesh Kumar, G.,Venu Madhav K., Eswaraiah. K., (2019), “Parametric Studies on Centrifugal Heart Pump for Total Artificial Heart (TAH) using Genetic Algorithms”, ASAIO Journal, May-June 2019, Volume 65, ISBN 1058-2916, pp 143, Vol. 65, Supplement-1, ISSN: 1058-2916 Wolters Kluwer Publishers |
6 |
Ganesh Kumar, G.,Ashoka Reddy, K., Venu Madhav K., Eswaraiah. K., (2020), “Mathematical and Experimental Studies On Effect of Number of Blades On Centrifugal Pump Used in Left Ventricular Assisted Device (LVAD), ASAIO Journal June 20, Volume 66, ISSN 1058-2916, pp 83, Wolters Kluwer Publishers |
7 |
Ganesh Kumar, G., Sridhar K., (2019), “Simulation Studies on Conjugate Mixed Convection Perforated Fins”, International Journal of Scientific Research and Review, Volume 7, Issue7, pp 79-86. ISSN No. 2279-543X, |
8 |
Ganesh Kumar, G., Sridhar K., (2019), “Exhaust heat recovery from compression ignition engines for power generation”, International Journal of Scientific Research and Review, Volume 7, Issue7, pp 250-256 |
9 |
G. Ganesh Kumar, (2015),“Experimental investigation on Thermo-electric generator Used in Compression Ignition Engines”, International Journal of Science and Research (IJSR), 2015, ISSN (Online): 2319-7064, Vol. 4 (6), pp 196-200 |
10 |
G. Ganesh Kumar, and B. Anil Kumar, (2015), “Experimental Studies on Combined Conduction and Convection Through Perforated Fins”, International Journal of Mechanical and Production Engineering (IJMPE), Vol. 3 (3), 2015 pp 22-24, IJMPE-IRAJ-DOI-1809. ISSN: 2320-2092 |
11 |
G. Ganesh Kumar (2015), “Conjugate mixed convection through perforated extended surfaces”, International Journal of Engineering Sciences & Research Technology, Vol 4 (6), ISSN (Online): E – ISSN: 2277-9655, pp-306-311. |
12 |
G. Ganesh Kumar, (2015) “Experimental investigation on Waste recovery from Compression Ignition Engine Using Thermo-Electric Generator (TEG)”, International Journal of Science, Engineering and Technology Research, Vol 4(6), June, 2015, pp. 1798-1802, E-ISSN: 2278 – 7798. |
13 |
Ganesh Kumar, G., and Gururaja Rao, C., (2015), “Buoyancy-aided Conjugate Mixed Convection with Surface Radiation from an Electronic Board with Non-Identical”, Manufacturing Science and Technology, ISSN: 2333-2735; 2333-2697 (Online) Vol. 3(2) pp. 42-47. |
14 |
G. Ganesh Kumar (2015), “Comparative Studies on Conjugate Mixed Convection in Perforated Fins”, International Journal of Science and Research (IJSR), 2015, ISSN (Online): 2319-7064, Vol. 4 (6) pp. 683-687 |
15 |
G. Ganesh Kumar, K. Sridhar, and B. Anil Kumar, (2015)“Experimental Studies on Conjugate mixed Convection Heat Transfer Through Perforated Fins”, International Journal of Science, Engineering and Technology Research, Vol. 4 (6) June, 2015, pp. 1803-1808, E-ISSN: 2278 – 7798 |
16 |
G. Ganesh Kumar, K. Sridhar, and V. Sampath., (2015), “Experimental Studies on Performance Characteristics of Thermo-Electric Generator used in Compression Ignition Engines”, International Journal of Engineering Sciences & Research Technology, 2015, 4(6), ISSN (Online): E – ISSN: 2277-9655, pp-245-250. |
17 |
Ganesh Kumar, G., and Gururaja Rao, C., (2012), Parametric studies and correlations for combined conduction-mixed convection-radiation from a non-identically and discretely heated vertical plate, Heat Mass Transfer, Vol. 48, pp. 505–517. |
18 |
Ganesh Kumar, G., and Gururaja Rao, C., (2011), Interaction of surface radiation with conjugate mixed convection from a vertical plate with multiple non-identical discrete heat sources, Chemical Engineering Communications, Vol. 198, pp. 692 – 710.ISSN: 0098-6445, IF: 1.802 |
19 |
Ganesh Kumar, G., and Gururaja Rao, C., (2010), Parametric studies on combined conduction-mixed convection-radiation from a discretely and non-identically heated electronic board, International Journal of Advances in Thermal Sciences and Engineering, Vol. 1 (2), pp. 127 – 132, ISSN: 0976-6820 |
BOOK CHAPTER
S.No |
Details |
1 |
Title: "Three Vane Small Scale Wind Turbine for Domestic Purposes", Id: 198272; 978-620-0-31931-9 |
Publications in Refereed Conference Proceedings
S.No |
Details |
1. |
Ganesh Kumar, G., Sridhar, K., Vinod Kumar G., (2021), “Performance of Solar Air heater with Aluminium Tubes”, International Conference on Challenges and Opportunities for innovation in New Normal Scenario”, 03. 04.2021, KSR Institute for Engineering and Technology, Nammakal, Tamil Nadu, Paper Id: K627, pp 323-335. |
2. |
Ganesh Kumar, G., Sridhar, K., Vinod Kumar G., (2021), “Thermal and computational studies of loop heat pipe wick”, International Conference on Challenges and Opportunities for innovation in New Normal Scenario”, 03. 04.2021, KSR Institute for Engineering and Technology, Nammakal, Tamil Nadu, Paper Id: K626, pp 88. |
3. |
Ganesh Kumar, G., Sridhar, K., Ashoka Reddy, K., Venu Madhav K., Eswaraiah. K., (2020), ““Experimental and Numerical Studies of a Centrifugal Heart Pump Used for Total Artificial Heart (TAH), 67th Virtual ASAIO Conference, 10-12, 2021, Washington D. C., USA, ISBN 1058-2916, pp 88 |
4. |
Ganesh Kumar, G., Sridhar, K., Ashoka Reddy, K., Venu Madhav K., Eswaraiah. K., (2020), “Comparative Studies on six and four bladed Centrifugal Heart Pump Used for Left Ventricular Assisted Device (LVAD)”,67th Virtual ASAIO Conference, 10-12, 2021, Washington D. C., USA, ISBN 1058-2916, pp 88. |
5. |
Ganesh Kumar, G. (2020), “Design and Fabrication of Plug-In Hybrid Electric Motorcycle”, 19-20 Dec, 2020, 6th International Conference “Shaastrarth – 2020”, at 6th International Conference “Shaastrarth – 2020” on the topic of “Socio-Economic Impact of Innovations in Sciences & Engineering", organized by Rungta College of Engineering & Technology, Bhilai (C.G.), INDIA.Registration ID: SH20-43 |
6. |
Ganesh Kumar, G. (2020), “Parametric studies on bow shock formed in aerodynamic flows”, 19-20 Dec, 2020, 6th International Conference “Shaastrarth – 2020”, at 6th International Conference “Shaastrarth – 2020” on the topic of “Socio-Economic Impact of Innovations in Sciences & Engineering", organized by Rungta College of Engineering & Technology, Bhilai (C.G.), INDIA.Registration ID: SH20-53 |
7. |
Ganesh Kumar, G., Jagadish Kumar, B., (2020), “Numerical analysis on angle of attack on bow shock formation in aerodynamic flows”, 26 Dec, 2020, 5th International Multi-Disciplinary Research Conference, Osmania University Center for International Program, Osmania University Campus, Hyderabad, India, ISBN 978-81-948668-1-7, pp 219-229. |
8. |
Ganesh Kumar, G., Jagadish Kumar, B., (2020), “Investigations on Plug-In Hybrid Electric Vehicle”, 26 Dec, 2020, 5th International Multi-Disciplinary Research Conference, Osmania University Center for International Program, Osmania University Campus, Hyderabad, India, ISBN 978-81-948668-1-7, pp 219-229. |
9. |
Ganesh Kumar, G., Ashoka Reddy, K., Venu Madhav K., Eswaraiah. K., (2020), “Mathematical and Experimental Studies On Effect of Number of Blades On Centrifugal Pump Used in Left Ventricular Assisted Device (LVAD), 66th Virtual ASAIO Conference, June 20-23, Chicago, USA, ISBN 1058-2916, pp 83. |
10. |
G. Ganesh Kumar, K. Venu Madhav, (2019), Presented a Seminar on “Left Ventricular Assisted Device”,4th International Symposium on Indo-American Artificial Heart ProjectSymposium”, held on 24.06.2019 at San Fran Cisco, USA |
11. |
Ganesh Kumar, G., Venu Madhav K., Eswaraiah. K., (2019), “Parametric Studies on Centrifugal Heart Pump for Total Artificial Heart (TAH) using Genetic Algorithms”, 26-29 June, 2019, San Fran Cisco, USA. |
12. |
G. Ganesh Kumar, K. Sridhar, (2019), “Exhaust heat recovery from compression ignition engines for power generation”, XVII International Conference on Recent Trends in Engineering, Science, and Management (ICRTESM-19), organized at Mahratta Chamber of Commerce, Industries and agriculture Tilak Road, Pune, India on 28.07.2019, pp 250-256. |
13. |
G. Ganesh Kumar, K. Sridhar, (2019), “Simulation Studies on Conjugate Mixed Convection Perforated Fins”, XVII International Conference on Recent Trends in Engineering, Science, and Management (ICRTESM-19), organized at Mahratta Chamber of Commerce, Industries and agriculture Tilak Road, Pune, India on 28.07.2019, pp 79-86. |
14. |
G. Ganesh Kumar, K. Sridhar, (2019), “Simulation Studies on Effect of Angle of Attack on Bow Shock Formation in Aerodynamic Flows”, International Conference on Advances in Renowned Renewable Energy Technologies(ICARRET-2019) from 23rd& 24th October, 2019, organized by Department of Mechanical Engineering VRSEC Vijayawada, Andhra Pradesh pp 79-86. |
15. |
G. Ganesh Kumar, K. Sridhar, (2019), “Design, simulation and analysis of a three vane small scale wind turbine”, International Conference on Advances in Renowned Renewable Energy Technologies(ICARRET-2019) from 23rd& 24th October, 2019, organized by Department of Mechanical Engineering VRSEC Vijayawada, Andhra Pradesh pp 79-86. |
16. |
D. Srinu, G. Ganesh Kumar, K. Sridhar, (2019), “Parametric studies on combined conduction and convection heat transfer in perforated fins,” International Conference on New Frontiers in Chemical, Energy and Environmental Engineering (INCEEE-19), organized at National Institute of Technology, Warangal, 15-16, Feb, 2019 |
17. |
G. Ganesh Kumar, K. Venu Madhav(2018), “Presented a Seminar on Total Artificial Heart in IAAHP at KITSW”, 3rd IAAHP Symposium, held on 16.06.2018 at Washington DC. |
18. |
Ganesh Kumar, G., and Anil Kumar, B., (2015), “Experimental Studies on Combined Conduction and Convection Through Perforated Fins”, International Conference on Computer Science and Mechanical Engineering, ICCSME-PUNE, Organized by IRAJ Research Forum (IRF), Pune, paper Id - IR-CSMEHYD-04015-303, Jan 11th, 2015, pp. 34-38, ISBN-978-93-84209-82-7. |
19. |
Ganesh Kumar, G., and Gururaja Rao, C., (2014), Buoyancy-aided conjugate mixed convectionwith radiation from an electronic board with discrete and non-identical heating, “International Conference on Theoretical, Applied, Computational and Experimental Mechanics, ICTACEM 2014”, at Indian Institute of Technology, Kharagpur, paper Id 86, Dec 29th – 31st, 2014, pp. 100-101, ISBN: 978-93-80813-30-1. |
20. |
Ganesh Kumar, G., and Anil Kumar, B., (2014), Experimental and Simulation Studies on Combined Conduction and Convection Heat Transfer in Perforated Fins, “International Conference on Industrial, Mechanical and Production Engineering: Advancements and Current Trends, ICIMPACT 2014”, at Maulana Azad National Institute of Technology, Bhopal, paper Id TH 3005, Nov 27th – 29th, 2014, pp. 338-343, ISBN: 978-93-84935-03-0 |
21. |
Ganesh Kumar, G., and Gururaja Rao, C., (2014), Buoyancy-aided conjugate mixed convection with surface radiation from an electronic board with non-identical heat sources, “International Conference on Industrial, Mechanical and Production Engineering: Advancements and Current Trends, ICIMPACT 2014”, at Maulana Azad National Institute of Technology, Bhopal, paper Id-TH3037, Nov 27th – 29th, 2014, pp. 430-435, ISBN: 978-93-84935-03-0. |
22. |
Ganesh Kumar, G., and Gururaja Rao, C., (2013) Simulation Studies on Interactive Effects of Surface Radiation on Conjugate Mixed Convection from a Vertical Discretely Heated Electronic Board, “2nd World Conference on Applied Sciences, Engineering & Technology (WCSET 2013)”, GITAM University Hyderabad, Paper Id WC13ME00, pp 1-6 |
23. |
Ganesh Kumar, G., and Gururaja Rao, C., (2010) Interaction of surface radiation with buoyancy-aided conjugate mixed convection from a non-identically and discretely heated vertical electronic board, “International Conference on Theoretical, Applied, Computational and Experimental Mechanics, ICTACEM 2010”, at Indian Institute of Technology, Kharagpur, paper 82, pp. 1 – 14,Dec 27th – 29th, 2010. |
24. |
Ganesh Kumar, G., and Gururaja Rao, C., (2010) Parametric studies on combined conduction-mixed convection-radiation from a discretely and non-identically heated electronic board, “4th International Conference on Advances in Mechanical Engineering, ICAME-2010”, S. V. National Institute of Technology, Surat, Gujarat, India, pp. 667 – 676, Sep 23rd – 25th, 2010. |
25. |
Ganesh Kumar, G., and Gururaja Rao, C., (2010) Conjugate mixed convection with surface radiation from a vertical plate with multiple non-identical heat sources, “International Conference on Frontiers in Mechanical Engineering, FIME - 2010”, National Institute of Technology, Surathkal, Karnataka, pp. 168 – 175, May 20th – 22nd, 2010. |
26. |
Ganesh Kumar, G., and K. S. Reddy, (2003), “Energy conservation in mining industries - A case study”, International Conference on Energy and Environmental Technologies for Sustainable Development, MNIT Jaipur, 8-10 October, 2003, p. 19. |
27. |
Participated an International Conference on “New Millennium – Alternative Energy Solutions for Sustainable Development”, at PSG College of Engineering, Coimbatore, during 17th Jan 2003 to 19th Jan 2003. |
| Publications in National Conferences | |
24. |
G. Ganesh Kumar (2016), Simulation studies on combined conduction and convection through perforated extended surfaces, “National Conference on Recent Innovations in Mechanical and Manufacturing Engineering (RIMME-2016), 21-22, April 2016, B V Raju Institute of Technology, Narsapur, Medak Dt., Telangana. pp. 72-76. ISBN: 978-93-85100-45-1. |
25. |
Anil Kumar, B., and Ganesh Kumar, G., (2014), Parametric Studies on Combined Conduction - Convection Heat Transfer Through Perforated Pin Fins, “National Conference on Emerging Trends in Mechanical Engineering, (ETIME-2014), Osmania University, University College of Engineering, Hyderabad, Telangana, paper Id T-324, Dec 29th-30th 2014, pp. 349-355, ISBN: 978-93-83635-55-9. |
26. |
Ganesh Kumar, G, and Gururaja Rao, C., (2010) Simulation studies on interaction of radiation with conjugate mixed convection from a discretely heated vertical plate, “4th National Conference on Trends in Mechanical Engineering-10 (TIME - 2010)”, Kakatiya Institute of Technology and Sciences, Warangal, pp. 147 – 152, Dec 30th. |
PROFESSIONAL AFFILIATION
S.No |
Details |
1 |
Member – Indian Society for Technical Education. |
Short Term Training Programmes (STTP)/FACULTY DEVELOPMENT PROGRAMMES ATTENDED
S. No. |
Programme |
Duration |
Organized by |
1 |
ATAL AICTE Sponsored FDP on “Thermodynamic Analyses Of Energy Systems” |
12.07.2021-16.07.2021 |
AICTE Training And Learning (ATAL) |
2 |
ATAL AICTE Sponsored FDP on "Recent Advances in Mechanical Engineering Design” |
20.07.2021-24.07.2021 |
AICTE Training And Learning (ATAL) |
3 |
ATAL AICTE Sponsored FDP on Sustainability Engineering |
22.02.2021-26.02.2021 |
AICTE Training And Learning (ATAL) |
4 |
ATAL AICTE Sponsored FDP on Computational Fluid Dynamics A Potential Engineering Design Tool |
26.07.2021-30.07.2021 |
AICTE Training And Learning (ATAL) |
5 |
ATAL AICTE Sponsored FDP on 3D Printing & Design |
15.02.2021-19.02.2021 |
AICTE Training And Learning (ATAL) |
6 |
One Week Faculty Development Programme on RECENT DEVELOPMENTS IN MECHANICAL ENGINEERING |
07.07.2020-11.07.2020 |
Kakatiya Institute of Technology and Science, Warangal |
7 |
One Week Faculty Development Programme on Emerging Trends in Advanced Materials and Manufacturing Processes |
29.06.2020-03.07.2020 |
Kakatiya Institute of Technology and Science, Warangal |
8 |
One Week Training Course on Lab View |
16-20 July, 2018 |
Kakatiya Institute of Technology and Science, Warangal |
9 |
International Webinar on “SUCCESSFUL RESEARCH PAPERS: FROM CONCEPT TO SUBMISSION” |
13.07.2020 |
Kakatiya Institute of Technology and Science, Warangal & Global Information Systems Technology (GIST) |
10 |
One Week Faculty Development Programme on Recent Trends in Mechanical Engineering |
07-11 July 2020 |
Kakatiya Institute of Technology and Science, Warangal |
11 |
Advanced Materials and Manufacturing |
29 June-03 July 2020 |
Kakatiya Institute of Technology and Science, Warangal |
12 |
A One Week Faculty Development Programme on Advanced Materials and Manufacturing |
29 June-03 July 2020 |
Kakatiya Institute of Technology and Science, Warangal |
13 |
12 Week NPTEL Program Conduction and Convection Heat Transfer |
27.01.2020- 22.06.2020 |
NPTEL. |
14 |
12 Week NPTEL Program on “NCBA Accreditation and Teaching in Engineering (NATE) |
27.01.2020- 22.06.2020. |
NPTEL. |
15 |
A One Week Faculty Development Programme on Disruptive “Disruptive Technologies in Digital Manufacturing (DTM-19) |
25-29 November, 2019 |
Kakatiya Institute of Technology and Science, Warangal |
16 |
A One Week Faculty Development Programme on Research Methodology (RM-19) |
7-11 January, 2019 |
Kakatiya Institute of Technology and Science, Warangal |
17 |
A One Week Short Term Training Programme on Hands on Programme on ANSYS Software (HPAS) |
12-16 Nov, 2018 |
Kakatiya Institute of Technology and Science, Warangal |
18 |
A One Week Short Term Training Programme on Engineering Drawing |
20 Feb-05 March, 2018 |
Kakatiya Institute of Technology and Science, Warangal |
19 |
One-Week Faculty Development Program on “Quality Assurance in Higher Educational Institutions and Industries, Renewal Energy Technologies and Distributed Generation-2017 (RET & DG) |
19 - 23 July, 2017 |
Kakatiya Institute of Technology and Science, Warangal |
20 |
Effective Methods of teaching the course on ‘Internal Combustion Engines and alternative power sources for Automobiles in association with Teaching-Learning Center |
19 - 24 June, 2017 |
National Institute of Technology, Warangal, |
21 |
HR Training Sessions on Faculty Mission at Confederation of Institute Industry, Begumpet, at Hyderabad |
28.04.2011. |
Kakatiya Institute of Technology and Science, Warangal |
22 |
Design of Experimental Setup for Engineering Practice-‘08 |
28th Aug, 2008 to 5th Sep 2008 |
National Institute of Technology, Warangal |
23 |
Effective Teaching & Accreditation |
12th Feb, 2007 to 17th Feb, 2007 |
Sreenidhi Institute of Science & Technology, Hyderabad |
24 |
Workshop on “MATLAB & SIMULINK” |
4th Sep 2006 to 8th Sep 2006 |
S. R. Engineering College |
25 |
One-day seminar on “Energy Conservation Technologies” |
30th Mar 2003 |
National Institute of Technology, Warangal |
26 |
Work Shop on Recent Trends in Foundry & Welding Technologies |
30-31 Oct 1998 |
V. R. S. Engineering College during. |
27 |
Work Shop on ISO 9000 Quality Systems |
20th Feb 1997 |
V. R. S. Engineering College during |
RESEARCH GUIDANCE (Ph.D Level)
| S.No. | Name of the scholar |
Title of Thesis/ Area of Research |
University |
Status |
Co-supervisor, if any |
|---|---|---|---|---|---|
1 |
Sri. D. Srinu |
Experimental and Numerical Studies on Thermo-Electric Generator Used in Internal Combustion Engines |
Kakatiya University, Warangal |
Ongoing |
-- |
2 |
Sri. B. Naveen Kumar |
Conjugate mixed convection with surface radiation through a Copper plate used in thermo electrical generator |
Kakatiya University, Warangal |
Ongoing |
- |
INVITED LECTURES
S. No. |
Details of Lecture/Session |
1. |
Delivered an invited lecture on “An overview on COMPUTATIONAL METHODS IN THERMAL ENGINEERING” in One Week Faculty Development Programme on Recent Trends in Mechanical Engineering, on 08.07.2020 from 12pm to 1.30 pm. organized byKakatiya Institute of Technology and Science, Warangal |
2. |
Delivered an invited lecture on “COMPUTATIONAL METHODS IN ENGINEERING - A case Study” in A One Week Faculty Development Programme on Disruptive “Disruptive Technologies in Digital Manufacturing (DTM-19)”, on 26 November, 2019, at 2.00-3.00 pm” organized byKakatiya Institute of Technology and Science, Warangal |
3. |
Delivered an invited lecture on “Application of a CFD tool for a research problem” 15.11.2018 from 10.30 am -12.00 pm in, A One Week Short Term Training Programme on Hands on Programme on ANSYS Software (HPAS) from 12-16 November, 2018”, Kakatiya Institute of Technology and Science, Warangal |
4. |
Guest lecture on, “Computational Techniques used in TAH” in 10th Winter Institute in Global Health (WIGH-2020) on 01.01.2019, organized by Birla Institute of Technology and Sciences, Pilani, Hyderabad Campus |
5. |
Guest lecture on, “Projection of Straight Lines” on 23.02.2018 in One Week Short Term Training Programme on Engineering Drawing held at Kakatiya Institute of Technology and Science, Warangal |
6. |
Invited Lecture on, “Total Artificial Heart (TAH)”, at KITSW on 22.09.2018 |
7. |
Guest lecture on “Engineering Drawing” in Kakatiya University on 04.02.2018 |
8. |
Guest lecture on “Heat Transfer” in Kakatiya University on 02.02.2018 |
9. |
Invited Lecture on “Introduction to Computational Methods”, on 01.07.2016 from 1.30-3.30 pm in One Week Faculty Development Program on Research Methologies and Computational Techniques (RMCT-16) |
10. |
Guest lecture on “Awareness program on Numerical Methods”, on 15.05.2013 in AICTE Sponsored International Faculty Development Programme on Computer Aided Processes Engineering and Computational Fluid Dynamics (CAPE & CFD - 2013)from 6th – 18th, May, 2013 organized by Department of Chemical Engineering, Centurion University of Technology and Management-761211, Dist: Gajapati, Odisha, India |
11. |
Delivered Guest Lecture on Lecture on “Convective Heat Transfer”, on 17.03.2015 at Chaitanya Institute of Engineering and Technology, Hyderabad. |
COURSES TAUGHT
Undergraduate Level |
||||
|---|---|---|---|---|
Courses Taught |
Currently Teaching |
|||
Course |
Semester, Year, Branch |
Course |
Semester, Year, Branch |
|
Internal Combustion Engines |
II Sem, III/IV, ME |
Applied Thermodynamics |
IV Semester, ME |
|
Mechanics of Solids-I |
I Sem, II/IV, |
Heat Transfer |
III Year, ME |
|
Mechanics of Solids-II |
II Sem, II/IV, Mech. Engg. |
Engineering
Thermodynamics |
II Year, ME |
|
Engineering Thermodynamics |
II Sem, II/IV, , ME |
|||
Machine Drawing |
I Sem, II/IV, ME |
|
|
|
Mechanical Technology |
I Sem, II/IV, Civil Engg. |
|
|
|
Production Technology |
II Sem, III/IV, Mech. Engg. |
|
|
|
Manufacturing Processes |
II Sem, IV/IV, Chemical. Engg. |
|
|
|
Industrial Management |
II Sem, IV/IV, Chemical. Engg. |
|
|
|
Introduction to C and C++ |
I/IV, Metallurgy. Engg |
|
|
|
Thermodynamics |
IV Sem, ME |
|||
Heat Transfer |
II Sem, III/IV, ME. |
|||
Basic Mechanical Engineering |
I Sem & II Sem ECE, CSE, EEE, ME |
|||
Refrigeration and Air Conditioning |
I Sem, IV/IV, ME |
|||
Engineering Graphics |
I/ IV B. Tech. |
|||
Machine Tools |
III Yr, ME |
|||
Applied Thermodynamics |
V Sem, III/IV, ME |
|||
Postgraduate Level |
||||
Manufacturing Systems Engg. |
I Sem, M.Tech.(DE) |
|
|
|
Computational Fluid Dynamics |
I Sem, M.Tech.(DE) |
|
|
|
SPONSORED PROJECTS
S. No. |
Details |
Value(Rs.) in Lakhs |
Status |
1 |
Experimental Investigation on Performance Parameters of Thermo-Electric Generator in Spark Ignition Engines |
2.475 |
Sanctioned in October 2016 |
2 |
Solar Photovoltaic Lab Kits”, from National Center for Photovoltaic Research and Education (NCPRE) |
2. 25 |
Completed |
3 |
MODROBS, Internal Combustion Engines Laboratory |
12.28 |
Completed |
FOREIGN VISITS
S. No. |
Place of visit |
Purpose of visit |
Name of Event |
Duration |
1. |
Washington DC, USA |
Attend the Conference |
Annual Conference on "American Society of Internal Organs (ASAIO-18)" Washington D.C., USA |
13-16 June 2018 at Hotel Hilton, |
2. |
University of Pittsburgh, USA |
Presented a seminar on Progress report on IAAHP at KITSW |
Seminar in 3rd International Symposia of "Indo-American Artificial Heart Project (IAAHP)" |
17.06.2018 |
3. |
San Fran Cisco, USA |
To Present a paper on Parametric Studies on Centrifugal Heart Pump for Total Artificial Heart (TAH) using Genetic Algorithms |
65th Annual ASAIO Conference |
26-29 June, 2019 |
4. |
San Fran Cisco, USA |
Presented a seminar on Progress report on IAAHP at KITSW |
Seminar in 4th International Symposia of "Indo-American Artificial Heart Project (IAAHP)" |
17.06.2018. |
AWARDS
S. No. |
Details |
1. |
Recipient of best paper award in International Conference on New Frontiers in Chemical, Energy and Environmental Engineering (INCEEE-19), organized at National Institute of Technology, Warangal |
2. |
Recipient of Partial Tuition Scholarship from Union Grants Commission India for qualifying in GATE (81.55 percentile). |
3. |
Recipient of ‘C’ certificate from National Cadet Corp, India in 1998. |
4. |
Recipient of Certificate of Readers Research Modern Institute for standing third rank in the test conducted on General Knowledge Improvement. |
Best viewed in browser Internet Explorer 9 or above with screen_Resolution
1280X1024